Custom Spinal

Custom TLSO Soft Body

TLSO Soft Body Bivalve (front)
TLSO Soft Body Bivalve (back)TLSO Soft Body Anterior Opening (front)TLSO Soft Body Anterior Opening (back)

OPTEC possesses one of the largest spinal databases and physical libraries in the industry.  We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient.  Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

*Scanned images are accurate to within one millimeter.

 

  • Available: Custom fabricated finished or unfinished
  • Opening: Anterior or Bivalve
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Outter Layer: Hyperallergenic firm aliplast in 1/8”
  • Middle Layer: LDPE, MPE or HDPE shell or stays
  • Inner Layer: Soft hypoallergenic foam in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws
    • Single opening closure kit with straps, chafes, loops & Chicago screws 
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads

TYPICAL INDICATIONS

  • Burst Fx
  • Compression Fx
  • Kyphosis
  • Laminectomy
  • Osteoporosis
  • Paraplegia
  • Post-Operative
  • Spinal Stenosis

PDAC Approved L0486 (Bivalve)

PDAC Approved L0482 (Single Opening)

Custom TLSO Soft Body

TLSO Soft Body Bivalve (front)
TLSO Soft Body Bivalve (back)TLSO Soft Body Anterior Opening (front)TLSO Soft Body Anterior Opening (back)

OPTEC possesses one of the largest spinal databases and physical libraries in the industry.  We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient.  Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

*Scanned images are accurate to within one millimeter.

 

  • Available: Custom fabricated finished or unfinished
  • Opening: Anterior or Bivalve
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Outter Layer: Hyperallergenic firm aliplast in 1/8”
  • Middle Layer: LDPE, MPE or HDPE shell or stays
  • Inner Layer: Soft hypoallergenic foam in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws
    • Single opening closure kit with straps, chafes, loops & Chicago screws 
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads

TYPICAL INDICATIONS

  • Burst Fx
  • Compression Fx
  • Kyphosis
  • Laminectomy
  • Osteoporosis
  • Paraplegia
  • Post-Operative
  • Spinal Stenosis

PDAC Approved L0486 (Bivalve)

PDAC Approved L0482 (Single Opening)

Custom TLSO Soft Body

TLSO Soft Body Bivalve (front)
TLSO Soft Body Bivalve (back)TLSO Soft Body Anterior Opening (front)TLSO Soft Body Anterior Opening (back)

OPTEC possesses one of the largest spinal databases and physical libraries in the industry.  We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient.  Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

*Scanned images are accurate to within one millimeter.

 

  • Available: Custom fabricated finished or unfinished
  • Opening: Anterior or Bivalve
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Outter Layer: Hyperallergenic firm aliplast in 1/8”
  • Middle Layer: LDPE, MPE or HDPE shell or stays
  • Inner Layer: Soft hypoallergenic foam in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws
    • Single opening closure kit with straps, chafes, loops & Chicago screws 
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads

TYPICAL INDICATIONS

  • Burst Fx
  • Compression Fx
  • Kyphosis
  • Laminectomy
  • Osteoporosis
  • Paraplegia
  • Post-Operative
  • Spinal Stenosis

PDAC Approved L0486 (Bivalve)

PDAC Approved L0482 (Single Opening)

Custom TLSO Soft Body

TLSO Soft Body Bivalve (front)
TLSO Soft Body Bivalve (back)TLSO Soft Body Anterior Opening (front)TLSO Soft Body Anterior Opening (back)

OPTEC possesses one of the largest spinal databases and physical libraries in the industry.  We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient.  Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

*Scanned images are accurate to within one millimeter.

 

  • Available: Custom fabricated finished or unfinished
  • Opening: Anterior or Bivalve
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Outter Layer: Hyperallergenic firm aliplast in 1/8”
  • Middle Layer: LDPE, MPE or HDPE shell or stays
  • Inner Layer: Soft hypoallergenic foam in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws
    • Single opening closure kit with straps, chafes, loops & Chicago screws 
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads

TYPICAL INDICATIONS

  • Burst Fx
  • Compression Fx
  • Kyphosis
  • Laminectomy
  • Osteoporosis
  • Paraplegia
  • Post-Operative
  • Spinal Stenosis

PDAC Approved L0486 (Bivalve)

PDAC Approved L0482 (Single Opening)

Custom TLSO Anterior Opening

TLSO Anterior Overlap (front)
TLSO Anterior Overlap (back)TLSO Anterior Opening (front) OPTEC USATLSO Anterior Opening (back) OPTEC USA

OPTEC possesses one of the largest spinal databases and physical libraries in the industry. We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient. Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

The Custom TLSO Anterior Overlap by OPTEC USA provides spinal support and immobilization created to your exact specifications.

*Scanned images are accurate to within one millimeter.

  • Available: Custom fabricated finished or unfinished
  • Overlap Options: Smooth, step (butted) or with tongues
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
  • Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws
    • Single opening closure kit with straps, chafes, loops & Chicago screws 
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads


Typical Indications

  • Compression Fractures
  • Degenerative, Herniated or Bulging Disc
  • Osteoporosis
  • Post-Operative
  • Spinal Thoracic Stabilization
  • Spondylitis
  • Thoracic Immobilization


PDAC Approved L0482

Custom TLSO Anterior Opening

TLSO Anterior Overlap (front)
TLSO Anterior Overlap (back)TLSO Anterior Opening (front) OPTEC USATLSO Anterior Opening (back) OPTEC USA

OPTEC possesses one of the largest spinal databases and physical libraries in the industry. We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient. Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

The Custom TLSO Anterior Overlap by OPTEC USA provides spinal support and immobilization created to your exact specifications.

*Scanned images are accurate to within one millimeter.

  • Available: Custom fabricated finished or unfinished
  • Overlap Options: Smooth, step (butted) or with tongues
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
  • Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws
    • Single opening closure kit with straps, chafes, loops & Chicago screws 
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads


Typical Indications

  • Compression Fractures
  • Degenerative, Herniated or Bulging Disc
  • Osteoporosis
  • Post-Operative
  • Spinal Thoracic Stabilization
  • Spondylitis
  • Thoracic Immobilization


PDAC Approved L0482

Custom TLSO Anterior Opening

TLSO Anterior Overlap (front)
TLSO Anterior Overlap (back)TLSO Anterior Opening (front) OPTEC USATLSO Anterior Opening (back) OPTEC USA

OPTEC possesses one of the largest spinal databases and physical libraries in the industry. We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient. Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

The Custom TLSO Anterior Overlap by OPTEC USA provides spinal support and immobilization created to your exact specifications.

*Scanned images are accurate to within one millimeter.

  • Available: Custom fabricated finished or unfinished
  • Overlap Options: Smooth, step (butted) or with tongues
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
  • Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws
    • Single opening closure kit with straps, chafes, loops & Chicago screws 
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads


Typical Indications

  • Compression Fractures
  • Degenerative, Herniated or Bulging Disc
  • Osteoporosis
  • Post-Operative
  • Spinal Thoracic Stabilization
  • Spondylitis
  • Thoracic Immobilization


PDAC Approved L0482

Custom TLSO Anterior Opening

TLSO Anterior Overlap (front)
TLSO Anterior Overlap (back)TLSO Anterior Opening (front) OPTEC USATLSO Anterior Opening (back) OPTEC USA

OPTEC possesses one of the largest spinal databases and physical libraries in the industry. We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient. Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

The Custom TLSO Anterior Overlap by OPTEC USA provides spinal support and immobilization created to your exact specifications.

*Scanned images are accurate to within one millimeter.

  • Available: Custom fabricated finished or unfinished
  • Overlap Options: Smooth, step (butted) or with tongues
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
  • Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws
    • Single opening closure kit with straps, chafes, loops & Chicago screws 
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads


Typical Indications

  • Compression Fractures
  • Degenerative, Herniated or Bulging Disc
  • Osteoporosis
  • Post-Operative
  • Spinal Thoracic Stabilization
  • Spondylitis
  • Thoracic Immobilization


PDAC Approved L0482

Custom TLSO Bivalve

TLSO Bivalve High Profile (front)
TLSO Bivalve High Profile (side)TLSO Bivalve High Profile (back)

OPTEC possesses one of the largest spinal databases and physical libraries in the industry. We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient. Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

The Custom TLSO Bivalve High Profile by OPTEC USA provides spinal support and immobilization created to your exact specifications.

*Scanned images are accurate to within one millimeter.

  • Available: Custom fabricated finished or unfinished
  • Bivalve Opening: Anterior over posterior or posterior over anterior
  • Overlap Options: Smooth, step (butted) or with tongues
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
  • Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Bivalve opening closure kit with straps, chafes, loops & Chicago screws
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws  
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads

Typical Indications

  • Burst Fx
  • Compression Fractures
  • Kyphosis
  • Laminectomy
  • Osteoporosis
  • Paraplegia
  • Post-Operative
  • Spinal Stenosis


PDAC Approved L0486

Custom TLSO Bivalve

TLSO Bivalve High Profile (front)
TLSO Bivalve High Profile (side)TLSO Bivalve High Profile (back)

OPTEC possesses one of the largest spinal databases and physical libraries in the industry. We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient. Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

The Custom TLSO Bivalve High Profile by OPTEC USA provides spinal support and immobilization created to your exact specifications.

*Scanned images are accurate to within one millimeter.

  • Available: Custom fabricated finished or unfinished
  • Bivalve Opening: Anterior over posterior or posterior over anterior
  • Overlap Options: Smooth, step (butted) or with tongues
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
  • Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Bivalve opening closure kit with straps, chafes, loops & Chicago screws
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws  
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads

Typical Indications

  • Burst Fx
  • Compression Fractures
  • Kyphosis
  • Laminectomy
  • Osteoporosis
  • Paraplegia
  • Post-Operative
  • Spinal Stenosis


PDAC Approved L0486

Custom TLSO Bivalve

TLSO Bivalve High Profile (front)
TLSO Bivalve High Profile (side)TLSO Bivalve High Profile (back)

OPTEC possesses one of the largest spinal databases and physical libraries in the industry. We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient. Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

The Custom TLSO Bivalve High Profile by OPTEC USA provides spinal support and immobilization created to your exact specifications.

*Scanned images are accurate to within one millimeter.

  • Available: Custom fabricated finished or unfinished
  • Bivalve Opening: Anterior over posterior or posterior over anterior
  • Overlap Options: Smooth, step (butted) or with tongues
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
  • Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Bivalve opening closure kit with straps, chafes, loops & Chicago screws
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws  
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads

Typical Indications

  • Burst Fx
  • Compression Fractures
  • Kyphosis
  • Laminectomy
  • Osteoporosis
  • Paraplegia
  • Post-Operative
  • Spinal Stenosis


PDAC Approved L0486

Custom CTLSO

CTLSO (side)
CTLSO (front)CTLSO (back)

OPTEC possesses one of the largest spinal databases and physical libraries in the industry. We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient.  Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

*Scanned images are accurate to within one millimeter.

  • Available: Custom-to-Measurement, Custom-to-Cast (Orthosis modified by negative cast or Pre-modified Cast) Finished & Complete or Unfinished
  • Bivalve Opening: Anterior over posterior or posterior over anterior
  • Overlap Options: Smooth, step (butted) or with tongues
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
  • Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Bivalve opening closure kit with straps, chafes, loops & Chicago screws 
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws    
    • Pneumatic lumbar bladder     - Polyethelene or foam tongues    
    • Shoulder or axilla straps with chafes, loops & Chicago screws      
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads
  • Cervical Attachments: Minerva (Adult or Pediatric)

TYPICAL INDICATIONS
  • C1-T1 Spinal Immobilization
  • Cervical Management
  • Limit Flexion, Extension, Rotation

Suggested L0700 or L0710

Custom CTLSO

CTLSO (side)
CTLSO (front)CTLSO (back)

OPTEC possesses one of the largest spinal databases and physical libraries in the industry. We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient.  Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

*Scanned images are accurate to within one millimeter.

  • Available: Custom-to-Measurement, Custom-to-Cast (Orthosis modified by negative cast or Pre-modified Cast) Finished & Complete or Unfinished
  • Bivalve Opening: Anterior over posterior or posterior over anterior
  • Overlap Options: Smooth, step (butted) or with tongues
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
  • Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Bivalve opening closure kit with straps, chafes, loops & Chicago screws 
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws    
    • Pneumatic lumbar bladder     - Polyethelene or foam tongues    
    • Shoulder or axilla straps with chafes, loops & Chicago screws      
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads
  • Cervical Attachments: Minerva (Adult or Pediatric)

TYPICAL INDICATIONS
  • C1-T1 Spinal Immobilization
  • Cervical Management
  • Limit Flexion, Extension, Rotation

Suggested L0700 or L0710

Custom CTLSO

CTLSO (side)
CTLSO (front)CTLSO (back)

OPTEC possesses one of the largest spinal databases and physical libraries in the industry. We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient.  Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

*Scanned images are accurate to within one millimeter.

  • Available: Custom-to-Measurement, Custom-to-Cast (Orthosis modified by negative cast or Pre-modified Cast) Finished & Complete or Unfinished
  • Bivalve Opening: Anterior over posterior or posterior over anterior
  • Overlap Options: Smooth, step (butted) or with tongues
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
  • Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Bivalve opening closure kit with straps, chafes, loops & Chicago screws 
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws    
    • Pneumatic lumbar bladder     - Polyethelene or foam tongues    
    • Shoulder or axilla straps with chafes, loops & Chicago screws      
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads
  • Cervical Attachments: Minerva (Adult or Pediatric)

TYPICAL INDICATIONS
  • C1-T1 Spinal Immobilization
  • Cervical Management
  • Limit Flexion, Extension, Rotation

Suggested L0700 or L0710

Custom LSO Bivalve Anterior over Posterior

Custom LSO Bivalve A over P (front) OPTEC
Custom LSO Bivalve A over P (back) OPTEC USA

OPTEC possesses one of the largest spinal databases and physical libraries in the industry. We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient. Each individual back brace is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

OPTEC's Custom LSO Bivalve Anterior over Posterior, like all of OPTEC's custom spinal orthotics, can be trimmed to finished measurements provided by you or according to OPTEC'S finished measurements.

*Scanned images are accurate to within one millimeter.

  • Available: Custom fabricated finished or unfinished
  • Bivalve Opening: Anterior over posterior or posterior over anterior
  • Overlap Options: Smooth, step (butted) or with tongues
  • Anterior Designs: Flexion, neutral or pendulous
  • Degree of Lordosis: Custom fabricated lordosis
  • Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
  • Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
  • Attachments & Accessories
    • Bivalve opening closure kit with straps, chafes, loops & Chicago screws
    • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
    • Pneumatic lumbar bladder
    • Polyethelene or foam tongues
    • Shoulder or axilla straps with chafes, loops & Chicago screws  
    • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
  • Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads


TYPICAL INDICATIONS

  • Burst Fx
  • Chronic Back Pain
  • Compression Fracture
  • Degenerative, Herniated or Bulging Disc
  • Lumbar Stabilization
  • Post-Operative Fusion
  • Spinal Stenosis
  • Spondylolysis
  • Spondylolisthesis

PDAC Approved L0640

Syndicate content