Custom Spinal

The Custom Bivalve Hip can be custom fabricated and is ideal for immobilization in the treatment of lumbar instability and lumbosacral fusion with anchoring to the sacrum.  Motion restrictions may include flexion/extension, rotation and lateral control.

A variety of hip joints providing flexion/extension, Drop Locks and abduction/ adduction are available.

• Available: Custom-to-Measurement, Custom-to-Cast (Orthosis modified by negative cast or Pre-modified Cast) Finished & Complete or Unfinished
• Bivalve Opening: Anterior over posterior or posterior over anterior
• Overlap Options: Smooth, step (butted) or with tongues
• Anterior Designs: Flexion, neutral or pendulous
• Degree of Lordosis: Custom fabricated lordosis
• Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
• Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
• Attachments & Accessories
  • Bivalve opening closure kit with straps, chafes, loops & Chicago screws
  • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
  • Pneumatic lumbar bladder
  • Polyethelene or foam tongues
  • Shoulder or axilla straps with chafes, loops & Chicago screws  
  • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
• Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads
• Hip Attachments & Joints: Thigh cuff, Becker Drop Lock, USMC Drop Lock, TLC Joint, Becker Chronic, Becker Millenium, USMC M.A.O.

TYPICAL INDICATIONS

• Lumbar Management/ Immobilization
• Hip Management/ Immobilization
• Post-Operative
• Pre-Operative

The Custom Bivalve Hip can be custom fabricated and is ideal for immobilization in the treatment of lumbar instability and lumbosacral fusion with anchoring to the sacrum.  Motion restrictions may include flexion/extension, rotation and lateral control.

A variety of hip joints providing flexion/extension, Drop Locks and abduction/ adduction are available.

• Available: Custom-to-Measurement, Custom-to-Cast (Orthosis modified by negative cast or Pre-modified Cast) Finished & Complete or Unfinished
• Bivalve Opening: Anterior over posterior or posterior over anterior
• Overlap Options: Smooth, step (butted) or with tongues
• Anterior Designs: Flexion, neutral or pendulous
• Degree of Lordosis: Custom fabricated lordosis
• Material Options: LDPE, MPE, HDPE, Copolymer, Polypropylene, ABS or Kydex   
• Liner: Unlined or hypoallergenic aliplast in 1/8”, 3/16” or 1/4”
• Attachments & Accessories
  • Bivalve opening closure kit with straps, chafes, loops & Chicago screws
  • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
  • Pneumatic lumbar bladder
  • Polyethelene or foam tongues
  • Shoulder or axilla straps with chafes, loops & Chicago screws  
  • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
• Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads
• Hip Attachments & Joints: Thigh cuff, Becker Drop Lock, USMC Drop Lock, TLC Joint, Becker Chronic, Becker Millenium, USMC M.A.O.

TYPICAL INDICATIONS

• Lumbar Management/ Immobilization
• Hip Management/ Immobilization
• Post-Operative
• Pre-Operative

OPTEC USA's SALO LSO is available in single opening and bivalve design. The SALO can be fabricated Custom for same day shipment.  The SALO can be used for patients of the general population, but is ideal for pediatric, geriatric and wheelchair bound patients requiring spinal stabilization and support.

The SALO is comprised of Plastic-Rigid foam-Soft foam.  The outer layer of plastic ensures proper alignment of the spine.  The in between layer of rigid foam adds stability and the inner soft foam provides your patient excellent padding and overall comfort.

OPTEC possesses one of the largest spinal databases and physical libraries in the industry.  We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient.  Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

*Scanned images are accurate to within one millimeter.

• Available: Custom fabricated finished or unfinished
• Opening: Anterior or Bivalve
• Overlap Options: Smooth, step (butted) or with tongues
• Anterior Designs: Flexion, neutral or pendulous
• Degree of Lordosis: Custom fabricated lordosis
• Outter Layer: LDPE, MPE or HDPE
• Middle Layer: Rigid foam
• Inner Layer: Soft hypoallergenic foam in 1/8”, 3/16” or 1/4”
• Attachments & Accessories
  • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
  • Pneumatic lumbar bladder
  • Polyethelene or foam tongues
  • Shoulder or axilla straps with chafes, loops & Chicago screws
  • Single opening closure kit with straps, chafes, loops & Chicago screws 
  • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
• Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads

TYPICAL INDICATIONS

• Lumbar Fusion
• Degenerative, Herniated or Bulging Disc
• Lumbar Stabilization
• Post-Operative
• Spondylolisthesis
• Spinal Stenosis
• Wheelchair Support

PDAC APPROVED L0640

OPTEC USA's SALO LSO is available in single opening and bivalve design. The SALO can be fabricated Custom for same day shipment.  The SALO can be used for patients of the general population, but is ideal for pediatric, geriatric and wheelchair bound patients requiring spinal stabilization and support.

The SALO is comprised of Plastic-Rigid foam-Soft foam.  The outer layer of plastic ensures proper alignment of the spine.  The in between layer of rigid foam adds stability and the inner soft foam provides your patient excellent padding and overall comfort.

OPTEC possesses one of the largest spinal databases and physical libraries in the industry.  We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient.  Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

*Scanned images are accurate to within one millimeter.

• Available: Custom fabricated finished or unfinished
• Opening: Anterior or Bivalve
• Overlap Options: Smooth, step (butted) or with tongues
• Anterior Designs: Flexion, neutral or pendulous
• Degree of Lordosis: Custom fabricated lordosis
• Outter Layer: LDPE, MPE or HDPE
• Middle Layer: Rigid foam
• Inner Layer: Soft hypoallergenic foam in 1/8”, 3/16” or 1/4”
• Attachments & Accessories
  • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
  • Pneumatic lumbar bladder
  • Polyethelene or foam tongues
  • Shoulder or axilla straps with chafes, loops & Chicago screws
  • Single opening closure kit with straps, chafes, loops & Chicago screws 
  • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
• Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads

TYPICAL INDICATIONS

• Lumbar Fusion
• Degenerative, Herniated or Bulging Disc
• Lumbar Stabilization
• Post-Operative
• Spondylolisthesis
• Spinal Stenosis
• Wheelchair Support

PDAC APPROVED L0640

A scoliosis brace is an orthotic device used to prevent the continual advancement of spinal incurvation. OPTEC's  technology has increased the comfort level of these specialized back braces while minimizing their physical contour. OPTEC's custom scoliosis brace are stronger, lighter and less bulky than any brace on the market.

Cad Cam & Modification Services


We can manufacture your scoliosis brace utilizing the latest Cad/ Cam technology which allows us to modify and carve a mold to your patient’s measurement or scanned image.* We can also use more traditional methods in fabricating your custom scoliosis brace from cast or measurements. (X-rays are required for a  finished scoliosis brace). 



Expertise


OPTEC’s expert technical & professional staff possess countless years of experience and expertise in custom spinal fabrication. “Orthotics on time” is not only our slogan, we truly do provide your spinal orthosis when you need it, how you need it, ready to fit.


TYPICAL INDICATIONS

• Idiopathic Scoliosis



*Scanned images are accurate to within one millimeter

Suggested L1300 or L1310

OPTEC SALO TLSO is available in single opening and bivalve design. The SALO can be fabricated Custom for same day shipment.  The SALO can be used for patients of the general population, but is ideal for pediatric, geriatric and wheelchair bound patients requiring spinal stabilization and support.

The SALO is comprised of Plastic-Rigid foam-Soft foam.  The outer layer of plastic ensures proper alignment of the spine.  The in between layer of rigid foam adds stability and the inner soft foam provides your patient excellent padding and overall comfort.

OPTEC possesses one of the largest spinal databases and physical libraries in the industry.  We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient.  Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

*Scanned images are accurate to within one millimeter.

• Available: Custom fabricated finished or unfinished
• Opening: Anterior or Bivalve
• Overlap Options: Smooth, step (butted) or with tongues
• Anterior Designs: Flexion, neutral or pendulous
• Degree of Lordosis: Custom fabricated lordosis
• Outter Layer: LDPE, MPE or HDPE
• Middle Layer: Rigid foam
• Inner Layer: Soft hypoallergenic foam in 1/8”, 3/16” or 1/4” 
• Attachments & Accessories
  • Bivalve opening closure kit with straps, chafes, loops & Chicago screws
  • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
  • Pneumatic lumbar bladder
  • Polyethelene or foam tongues
  • Shoulder or axilla straps with chafes, loops & Chicago screws  
  • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
• Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads

TYPICAL INDICATIONS

• Cancer Patients
• Cerebral Palsy
• Myelomeningocele
• Muscular Dystrophy
• Paraplegia
• Post-Operative
• Scoliosis
• Spinal Stabilization
• Wheelchair Seating Support

PDAC APPROVED BIVALVE L0486

PDAC APPROVED SINGLE OPENING L0482

OPTEC possesses one of the largest spinal databases and physical libraries in the industry.  We can manufacture your spinal orthosis utilizing the latest Cad/Cam technology which allows us to carve a mold nearly identical to your patient's measurement or scanned image* or by utilizing our extensive spinal library to secure a mold that can be modified to match your patient.  Each individual orthosis is fabricated to the patient's unique measurements and your specifications, ensuring the very best fit, support, and comfort.

*Scanned images are accurate to within one millimeter.

• Available: Custom fabricated finished or unfinished
• Opening: Anterior or Bivalve
• Anterior Designs: Flexion, neutral or pendulous
• Degree of Lordosis: Custom fabricated lordosis
• Outter Layer: Hyperallergenic firm aliplast in 1/8”
• Middle Layer: LDPE, MPE or HDPE shell or stays
• Inner Layer: Soft hypoallergenic foam in 1/8”, 3/16” or 1/4”
• Attachments & Accessories
  • Pectoral Pad (PPK/ PPX) with straps, chafes, loops & screws
  • Pneumatic lumbar bladder
  • Polyethelene or foam tongues
  • Shoulder or axilla straps with chafes, loops & Chicago screws
  • Single opening closure kit with straps, chafes, loops & Chicago screws 
  • Sternal Pad (SPK/SPX) with straps, chafes, loops & screws
• Options: Designer pattern applied to brace & straps, modified negative cast, relief buildup, ventilation & waist pads

TYPICAL INDICATIONS

• Anklosing Spondylitis
• Compression Fractures
• Degenerative, Herniated or Bulging Disc
• Laminectomy
• Lumbar Stabilization
• Spondylolysis
• Spondylolisthesis

PDAC Approved L0640